Crankbrothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud shedding capability, and customizable float and release angles create a dialed-in feel. Spindle material: Forged scm 435 chromoly steel Body material: One piece composite Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 294g per pair Warranty: 5 years
Whether you're in the heat of a race, or just sessioning your local trails, give yourself an advantage with Crank Brothers' Mallet DH pedals. They rock super easy-to-enter/exit 4-sided cages with wide aluminum platforms for serious support. Steel springs, steel wings and chromoly axles deliver DH-worthy durability that shrug off hard use and big hits. The open design quickly sheds mud for reliability in sloppy conditions and the eight adjustable traction pins per side grip well when you're riding clipped out in corners.
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
$59.99 - $80.00
Crank Brothers steps up to the plate to provide downhillers, freeriders, and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050s have removable plates so you have full freedom to customize pin location for rider preference and terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 pedals are crafted from 6061-aluminum and utilize a bushing and cartridge bearing system that is completely user-serviceable.
Page 1 of 1